Playing At Random - Random Play; Repeating Tracks Or Cds - Repeat Play; Prohibiting Disc Ejection - Tray Lock - JVC MX-J333VU Instructions Manual

To check the program contents by remote control
Before playing, you can check the program contents by pressing
1 / 4 9 or ¢ / ¡ * on the remote control.
• ¢ / ¡: Shows the programmed tracks in the programed order.
• 1 / 4: Shows them in the reverse order.
To modify the program
Before play, you can erase the programmed tracks
shown on the display by pressing CANCEL /.
• Each time you press the button, the programmed track
shown on the display is erased from the program.
To add tracks in the program before play, simply select the
track numbers you want to add by following step 4 of the
programming procedure on page 10.
To erase the entire program before or after play, press 7
z, _.
"PROGRAM" appears on the display.
• Ejecting a CD will also erase the track numbers programmed
from the ejected CD.
If you try to program a 33rd step
"FULL" will appear on the display.
If your entry is ignored
You have tried to program a track from an empty tray, or a track
number that does not exist on the CD (for example, selecting track
14 on a CD that only has 12 tracks). Such entries are ignored.
Playing at Random — Random Play
The tracks of all loaded CDs will play at random.
• To use Repeat play for Random play, press REPEAT n after
starting Random play.
1
Prepare CDs.
• If the current playing source is not the CD player, press CD
6 y, ), then 7
2
Press RANDOM b button.
A.BASS EX S.MODE
RANDOM
3
Press CD 6 y, ).
The tracks are played at random.
Random play ends when all the tracks are played
once.
To stop during play, press 7
• Random play also stops when the current disc tray is opened.
EN6-16;MX-J333V/PM6
DEMO
CANCEL
z, _ before going to the next step.
RANDOM
1 2 3
C D
z, _.
11
To exit from Random play mode, press RANDOM b again
before or after play so that the unit enters Continuous play mode.
Even if you press 4
the remote control)
You cannot go back to the previous tracks during Random play.
• If you press ¢ ; (or ¢ / ¡ * on the remote control), you
can go to next random tracks.
• RANDOM PLAY starts playing from the current tray and then
subsequently to the next tray when all the tracks from the current
tray are finished.
Repeating Tracks or CDs — Repeat Play
You can have all the CDs, the program or the individual track
currently playing repeat as many times as you like.
To repeat play, press REPEAT n during or before
playing. To use Repeat play for Program play and
Random play, press the button after starting playback.
• Each time you press the button, Repeat play mode changes as
follows, and the following indicator lights up on the display:
REPEAT ALL
Cancelled
(Continuous play)
REPEAT ALL: Repeats all the tracks on all the CDs
(continuously or at random), or all the tracks in
the program.
REPEAT 1CD*: Repeats all the tracks on one CD.
REPEAT 1**: Repeats one track on one CD.
* REPEAT 1CD is not used for Program play and Random play.
**REPEAT 1 is not used for Random play.
To cancel Repeat play, press REPEAT n repeatedly until the
REPEAT indicator (REPEAT ALL, REPEAT 1CD, or REPEAT 1)
goes off from the display.
• Repeat play is also cancelled when you select Program play or
Random play.
Prohibiting Disc Ejection — Tray Lock
You can prohibit CD ejection from the unit and can lock discs.
• This operation is possible only using the buttons on the unit.
To prohibit disc ejection, press 0 e for any disc tray while
holding 7
z. (If there is any disc tray opened, close it first.)
"LOCKED" appears for a while, and the loaded CDs are locked.
To cancel the prohibition and unlock the CDs, press 0 e
for any disc tray while holding 7
"UNLOCKED" appears for a while, and the loaded CDs are
unlocked.
If you try to eject CDs
"LOCKED" appears to inform you that the Tray Lock is in use.
11
6/30/99, 2:26 PM
4 ; ; ; ; ; (or 1 4 4 4 1 / 4 1 1 1 4 9 9 9 9 9 on 4 4 4
REPEAT
REPEAT 1CD
REPEAT 1
z.