Fuse Replacement; Front Panel - Sony CDX-GT270MP Operating Instructions Manual

1

2


Face the hook inwards.
Tournez le crochet vers
l'intérieur.
English
Precautions
 Choose the installation location carefully so that the unit
will not interfere with normal driving operations.
 Avoid installing the unit in areas subject to dust, dirt,
excessive vibration, or high temperatures, such as in
direct sunlight or near heater ducts.
 Use only the supplied mounting hardware for a safe and
secure installation.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Removing the protection
collar and the bracket (
Before installing the unit, remove the protection
collar  and the bracket  from the unit.
1 Remove the protection collar .
Pinch both edges of the protection collar , then
pull it out.
2 Remove the bracket .
 Insert both release keys  together between
the unit and the bracket  until they click.
 Pull down the bracket , then pull up the unit
to separate.
Mounting example ( )
Installation in the dashboard
Notes
 Before installing, make sure that the catches on both sides of the
bracket  are bent inwards 2 mm (
/ in). If the catches are straight or
3
32
bent outwards, the unit will not be installed securely and may spring
out (-1).
 Bend these claws outward for a tight fit, if necessary (-2).
 Make sure that the 4 catches on the protection collar  are properly
engaged in the slots of the unit (-3).

 
Mounting the unit in a
Japanese car (
You may not be able to install this unit in some makes of
Japanese cars. In such a case, consult your Sony dealer.
Note
To prevent malfunction, install only with the supplied screws .
How to detach and attach the

front panel (

Before installing the unit, detach the front panel.
-A To detach
Before detaching the front panel, be sure to press and hold
. Press the front panel release button, and
)
pull it off towards you.
-B To attach
Engage part  of the front panel with part  of the unit,
as illustrated, and push the left side into position until it
clicks.
Warning if your car's ignition
has no ACC position
Be sure to set the Auto Off function. For details, see the
supplied Operating Instructions.
The unit will shut off completely and automatically in the
set time after the unit is turned off, which prevents battery
drain.
If you do not set the Auto Off function, press and hold
 until the display disappears each time
you turn the ignition off.
1

2
3


Fuse replacement (

)
When replacing the fuse, be sure to use one matching the
amperage rating stated on the original fuse. If the fuse
blows, check the power connection and replace the fuse. If
the fuse blows again after replacement, there may be an
internal malfunction. In such a case, consult your nearest
Sony dealer.
)
Unit: mm (in)
Unité: mm (po)
182 (7 1 / )
4
53 (2 1 / )
8
Catch
Loquet
Claws
Griffes
Dashboard
Tableau de bord

)