Download  Print this page

Sony CDX-GT270MP Operating Instructions Manual

Sony fm/am compact disc player operating instructions.
Hide thumbs

Advertisement

FM/AM
Compact Disc
Player
Owner's Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer
regarding this product.
Model No. CDX-GT270MP
To cancel the demonstration (DEMO) display, see page 4.
Pour annuler l'affichage de démonstration (DEMO), reportez-
vous à la page 4.
CDX-GT270MP
Serial No.
4-426-948-11(1)
Operating Instructions GB
Mode d'emploi
FR

Advertisement

   Related Manuals for Sony CDX-GT270MP

   Summary of Contents for Sony CDX-GT270MP

  • Page 1 Owner’s Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. CDX-GT270MP Serial No.
  • Page 2 You are cautioned that any changes or Be sure to install this unit in the modifications not expressly approved in dashboard of the car for safety. this manual could void your authority to For installation and connections, operate this equipment. see the supplied installation/connections manual.
  • Page 3: Table Of Contents

    Table of contents Getting Started ........... . . 4 Canceling the DEMO mode .
  • Page 4: Getting Started

    Detaching the front panel Getting Started You can detach the front panel of this unit to prevent theft. Canceling the DEMO Press and hold  . mode The unit is turned off. Press the front panel release button , You can cancel the demonstration display which appears while this unit is turned off.
  • Page 5: Location Of Controls

    Location of controls Main unit RM-X201 Remote This section contains instructions on the location of controls and basic operations. commander  SOURCE/OFF button Press to turn on the power; select the source (Radio/CD/AUX). Press and hold for 1 second to turn off the power.
  • Page 6: Disc Slot

     Control dial/ENTER/MENU button  SOURCE button page 10 Press to turn on the power; select the Rotate to adjust volume. source (Radio/CD/AUX). Press to enter setup mode.   ()/ () buttons  Receptor for the remote To control radio/CD, the same as ...
  • Page 7: Radio

    Tuning automatically Radio Select the band, then press  +/– to search for the station. Storing and receiving Scanning stops when the unit receives a station. Repeat this procedure until the stations desired station is received. Caution When tuning in stations while driving, use If you know the frequency of the station you want Best Tuning Memory (BTM) to prevent an to listen to, press and hold ...
  • Page 8: Playing A Disc

    Type of programs NEWS (News), INFORM (Information), SPORTS (Sports), TALK (Talk), ROCK (Rock), CLS ROCK (Classic Rock), ADLT Playing a disc HIT (Adult Hits), SOFT RCK (Soft Rock), TOP 40 (Top 40), COUNTRY (Country), OLDIES (Oldies), SOFT (Soft), NOSTALGA This unit can play CD-DA (also containing (Nostalgia), JAZZ (Jazz), CLASSICL CD TEXT) and CD-R/CD-RW (MP3/ (Classical), R AND B (Rhythm and Blues),...
  • Page 9: Playing Tracks In Various Modes

    Playing tracks in various Sound Settings and modes Setup Menu You can listen to tracks repeatedly (repeat play) or in random order (shuffle play). During playback, press  ( ) or  (SHUF) repeatedly until the Customizing the equalizer desired play mode appears. curve —...
  • Page 10: Adjusting Setup Items

    Adjusting setup items BTM* (page 7) Press , rotate the control dial *1 When the unit is turned off. until the desired category appears, then *2 When the tuner is selected. press it. SOUND: Rotate the control dial until the desired item appears, then press it.
  • Page 11: Using Optional Equipment

    AUX VOL* (AUX Volume Level) Adjusts the volume level for each Using optional connected auxiliary equipment: equipment “+18 dB” – “0 dB” – “–8 dB.” This setting negates the need to adjust the volume level between sources. Auxiliary audio equipment *1 When EQ3 is activated (page 9).
  • Page 12: Additional Information

    • Discs that this unit CANNOT play – Discs with labels, stickers, or sticky tape or Additional paper attached. Doing so may cause a malfunction, or may ruin the disc. Information – Discs with non-standard shapes (e.g., heart, square, star). Attempting to do so may damage the unit.
  • Page 13: Maintenance

    Do not apply – lossless compression too much force. Otherwise, the connectors – copyright-protected may be damaged. If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer.
  • Page 14: Specifications

    Power amplifier section Notes Output: Speaker outputs • For safety, turn off the ignition before cleaning Speaker impedance: 4 – 8 ohms the connectors, and remove the key from the Maximum power output: 52 W × 4 (at 4 ohms) ignition switch.
  • Page 15: Troubleshooting

    During playback or reception, Troubleshooting demonstration mode starts.  If no operation is performed for 5 minutes The following checklist will help you remedy with “DEMO-ON” set, demonstration mode problems you may encounter with your unit. starts. Before going through the checklist below, –...
  • Page 16 – Check the connection. If the error indication MP3/WMA files take longer to play back than remains on in the display, consult your others. nearest Sony dealer.  The following discs take a longer time to start playback. PUSH EJT (Push Eject) –...
  • Page 17 If these solutions do not help improve the situation, consult your nearest Sony dealer. If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at the time the problem began.
  • Page 18 ©2012 Sony Corporation Printed in Thailand...
  • Page 19: Connection Diagram

    Compact Disc Player × 2  Installation/Connections Installation/Connexions × 4 CDX-GT270MP Notes on speaker connection English Connection diagram (  Before connecting the speakers, turn the unit off.  Use speakers with an impedance of 4 to 8 ohms, and with adequate power handling capacities to avoid its damage.
  • Page 20: Liste Des Composants

    Equipment used in illustrations (not supplied) Appareils utilisés dans les illustrations (non fournis) Front speaker Subwoofer Power amplifier Rear speaker Haut-parleur avant Caisson de graves Amplificateur de puissance Haut-parleur arrière from car antenna (aerial) à partir de l’antenne du véhicule Fuse (10 A) RCA pin cord (not supplied).
  • Page 21: Fuse Replacement

    If  Choose the installation location carefully so that the unit Japanese cars. In such a case, consult your Sony dealer. the fuse blows again after replacement, there may be an will not interfere with normal driving operations.
  • Page 22: Remplacement Du Fusible

     Évitez d’installer l’appareil dans un endroit exposé à la Pour éviter tout problème de fonctionnement, utilisez uniquement les vis détaillant Sony le plus proche.  fournies pour le montage. poussière, à la saleté, à des vibrations excessives ou à des températures élevées comme en plein soleil ou à...

Comments to this Manuals

Symbols: 0
Latest comments: