Konica Minolta Bizhub C353 User Manual page 498

Utility mode
HDD Settings
Parameter
Check HDD Capacity
Overwrite Temporary Data
Overwrite All Data
HDD Lock Password
Format HDD
HDD Encryption Setting
Function Management Settings
Parameter
Network Function Usage
Settings
!
Detail
The following functions cannot be used if "Network Function Usage Settings" is set to "OFF".
PC-FAX transmission
Using the HDD TWAIN driver to view and retrieve documents in user boxes
Using PageScope Box Operator to view and retrieve documents in user boxes
Using PageScope Scan Direct to retrieve documents in user boxes
Box operations using the PageScope Web Connection (The User Box tab does not appear.)
Stamp Settings
Parameter
Apply Stamps
Delete Registered Stamp
Note
If a stamp is set to be added with the "Apply Stamps" parameter, print settings cannot be changed with
the functions on the Stamp/Composition screen (displayed from the Application screen).
C353/C253/C203
Description
Information concerning the hard disk capacity is displayed.
Specify whether or not to overwrite the temporary image data
saved on the hard disk with all operations for copying, scan-
ning, faxing and computer printing. For details on the set-
tings, refer to the User's Guide [Box Operations]. By
specifying a setting to overwrite temporary data, the area of
the hard disk where image data is saved after printing or
sending can be overwritten, and the data can be erased. This
process prevents disclosure of image data on the hard disk.
Select this parameter to overwrite and delete all data on the
entire hard disk in the specified patterns for mode 1 through
mode 8 when returning the machine from lease or disposing
the machine in order to prevent disclosure of the data. For de-
tails on the settings, refer to the User's Guide [Box Opera-
tions]. Before performing this operation, contact your service
representative.
Specify the password for protecting data on the hard disk. For details, refer to the User's
Guide [Box Operations].
Format the hard disk. For details, refer to the User's Guide [Box Operations].
This setting appears when the optional Security kit is installed.
Specify an encryption passphrase to encrypt data in the hard disk.
For details, refer to the User's Guide [Box Operations]. When a setting is specified, all
data written to the hard disk is encrypted to protect it. If the encryption key is changed,
the hard disk will be reformatted.
Description
Specify settings for network functions that are difficult to
count when managing operations.
Description
Select whether or not a stamp is added when printing or sending.
Select whether or not stamps registered for copy protection can be deleted.
11
Default Setting
NO
Mode 1
Default Setting
ON
11-35