Connecting The Powered Subwoofer (Sp-Pw1000); Attaching The Spacers; Connecting External Equipment; Connecting An Md Recorder, Etc (Digital Output) - JVC FSSD1000CA Instructions Manual

Connecting the Powered Subwoofer (SP-PW1000)

&RQQHFWýDýVLJQDOýFRUGýõVXSSOLHGôýEHWZHHQýWKHý6\VWHP'Vý68%:22)(5ýWHUPLQDOýDQGýWKHý/()7î0212ý,1387ýWHUPLQDOýRIýWKH
3RZHUHGý6XEZRRIHUï
SUB WOOFER
* Use the plug whose diameter is 11mm or less.

Attaching the Spacers

Attach the supplied spacers to the bottom of the powered subwoofer (SP-PW1000) to protect the cabinet, prevent slipping,
and absorb the cabinet vibration. Peel off the backing from a spacer and attach it.

Connecting External Equipment

Connect signal cords (not supplied) between the System's MD/AUX-OUT/IN terminals and the output/input terminals of the
external MD recorder, tape deck, etc.
You can then listen to the external source through the System or record the System's CD player or tuner to the external unit.
* Use the plug whose diameter is 11mm or less.

Connecting an MD Recorder, etc (Digital Output)

Unplug the cap and connect an optical digital cord (not supplied) between the System's CD DIGITAL OUT terminal and the
input terminal of the MD recorder, etc.
You can record the digital output signal from the System's CD Player to the MD recorder, etc.
* Use the plug whose diameter is 11mm or less.
Signal cord
11mm Max.
*
Spacer
Signal cord (not supplied)
11mm Max.
*
SUB WOOFER
OUT IN
CD DIGITAL OUT
Stereo mini-plug
MD / AUX
Signal cord (not supplied)
ANTENNA
11mm Max.
*
FM(75 )
AM EXT
COAXIAL
AM LOOP
Stereo mini-plug
Cap
CD DIGITAL OUT
11mm Max.
*
Optical digital cord (not supplied)
Powered Subwoofer
Pin-plug x 2
MD recorder or tape deck
(not supplied)
Pin-plug x 2
MD recorder, etc. (not supplied)
Getting Started
7