Hyundai 2001 Tiburon Owner's Manual page 66

Hide thumbs Also See for 2001 Tiburon:
Table of Contents

Advertisement

3. TUNE (Manual) Selection Button
Press the (+) side or (-) side to increase or to
decrease the frequency.
With the button held down for 0.5 sec. or more,
the stop signal (broadcasting radio wave) is
ignored and channel selection continues.
4. SEEK Operation
(Automatic Channel Selection)
When the (+) side is pressed, the unit will
automatically tune to the next higher frequency
and when the (-) side is pressed, it will automat-
ically tune to the next lower frequency.
5. PRESET Button
Six (6) stations for AM, FM and FM2 respec-
tively can be preset in the electronic momory
circuit on this unit.
FEATURES OF YOUR HYUNDAI
HOW TO PRESET STATIONS
Six AM and twelve FM stations may be pro-
grammed into the memory of the radio. Then,
by simply pressing the band select button and/
or one of the six station select buttons, you may
recall any of these stations instantly. To pro-
gram the stations, follow these steps:
o Press the band selector to set the band for
AM, FM and FM2.
o Select the desired station to be stored by
seek, scan or manual tuning.
o Determine the preset station select button
you wish to use to access that station.
o Press the station select button for more than
two seconds. A select button indicator will
show in the display indicating which select
button you have depressed. The frequency
display will flash after it has been stored into
the memory.
You should then release the button, and pro-
ceed to program the next desired station. A
total of 18 stations can be programmed by
selecting one AM and two FM stations per
button.
o When completed, any preset station may be
recalled by selecting AM, FM or FM2 band
and the appropriate station button.
6. BAND Selector
Pressing the BAND button changes the AM,
FM1 and FM2 bands. The mode selected is
displayed on the VFD.
7. Best Station Memory Button (BSM)
When the BSM button is pressed for two sec-
onds or longer, the preceding memory is all
cleared, and six channels with the highest field
intensity are selected and stored in memory.
The stations selected are stored in the se-
quence of the preset key.
8. RADIO/TAPE/CD Conversion
Button
Each press of the button changes the display
as follows ;
RADIO
TAPE
CD
If there is no CD or TAPE in the COMPACT
DISC PLAYER or CASSETTE TAPE PLAYER.
It is impossible to operate the empty player.
1- 57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents