[Key function]
Set the operation to be performed when the REC button is pressed during recording.
•
Recording extension: The recording time is extended when the REC button is pressed.
•
Audio mute/unmute: Audio recording is switched from mute/unmute each time the REC button is pressed.
•
Default: Recording extension
Note
•
Operations for extending the recording and muting/unmuting the audio will start when the REC button
is released.
•
Refer to page 22 for further information about key functions
SD memory card recording
[Recording duration]
Set the length of recording that can be done on the SD memory card.
•
Auto: Recording is continuously performed.
•
Continue: Recording starts when the REC button is pressed. Recording stops when the REC button is
held down.
•
10min/ 15min/ 20min/ 30min/ 60min/ 90min: Recording starts when the REC button is pressed.
Recording stops when the specified time is exceeded or the REC button is held down.
•
Default: Continue
Note
•
When set to "Auto", recording cannot be started or stopped by pressing the REC button.
•
When downloading of the recorded data is started by Wearable Camera Agent Software, the camera
enters a recording prohibited state and the recording stops. To start recording again, disconnect the
network/charge cable from the conversion box and battery container, or disconnect the LAN cable.
[Pre recording duration]
Select whether or not to perform recording before the REC button is pressed.
When "Recording duration" is set to "Auto", this setting is unavailable.
Off/ 15s/ 30s
•
Default: 15s
Note
•
When "30s" is selected for "Pre recording duration", "8192kbps" cannot be selected for the "Max bit
rate".
[Overwrite]
Determine whether or not to overwrite when the remaining capacity of the SD memory card becomes
insufficient.
•
On: Overwrites when the remaining capacity of the SD memory card becomes insufficient. (The oldest
image is the first to be overwritten.)
•
Off: Stops saving images on the SD memory card when the SD memory card becomes full.
•
Default: Off
[Audio]
Select whether or not to perform audio recording from the following.
•
On1(not mute during pre recording): Audio is recorded.
•
On2(mute during pre recording): Audio is recorded. However, audio is not recorded during pre recording.
•
Off: Audio is not recorded
•
Default: On2(mute during pre recording)
5 Configure the basic settings of the camera [Basic]
Operating Instructions
21