2 Change the camera settings from a PC
IMPORTANT
•
The default setting of "Automatic installation of viewer software(nwcv4Ssetup.exe)" is "On". Follow the
instructions on page 49 when the message is displayed on the information bar of the browser.
•
When the "Live" page is displayed for the first time, the install wizard of the ActiveX
to display images from the camera will be displayed. Follow the instructions of the wizard.
•
Log onto the PC with administrator rights when installing the Viewer software.
•
When the install wizard is displayed again even after completing the installation of the ActiveX, restart
the PC.
•
The viewer software used on each PC should be licensed individually. The number of installations of
the viewer software from the camera can be checked on the [Upgrade] tab of the "Maintenance" page
(®page 39). Refer to your dealer for the software licensing.
10
Operating Instructions
control required
®