5 Configure the basic settings of the camera [Basic]
IMPORTANT
•
It is impossible to display images and to receive audio between the camera and the PC when the viewer
software "Network Camera View 4S" is not installed on the PC.
•
The number of the viewer software installations can be checked on the [Upgrade] tab of the
"Maintenance" page.
•
Recording stops when the settings are changed during recording.
5.2 Configure the settings relating to the SD memory
card [SD memory card]
Click the [SD memory card] tab on the "Basic" page. (®page 14, page 16)
The settings relating to the SD memory card can be configured on this page.
IMPORTANT
•
When removing the SD memory card from the camera, make sure to turn the Power button off before
removing the SD memory card.
•
There are limited times to overwrite on an SD memory card. When having a high frequency of
overwriting, the lifetime of the SD memory card may become shorter.
•
The data writing speed will go down after data are repeatedly written down on an SD memory card.
•
Recording stops when the settings are changed during recording.
20
Operating Instructions