Specifications
• You can load up to 10 envelopes (80 — 95 g/m
the same time, without compressing them. Check the envelopes are not
damp, and the top of the stack is not higher than the limit mark on the side
guide.
• When loading envelopes, be sure to unfold the flaps and position them oppo-
site to the paper feed direction.
• With a type D envelope, as shown below, fold the flap and load the envelope
with the fold of the flap against the side guide and the flap underneath.
8
• Depending on the envelope type, specify appropriate print image rotation
with the printer driver. For a type A or B envelope, specify 180 degrees; for
a type D, 90 degrees or 270 degrees.
• Check there is no air in the envelopes before loading.
• To get better print quality, it is recommended that you set the right, left, top,
and bottom print margin, to at least 15 mm (0.6") each.
• You cannot print envelopes with duplex function.
• Load only one size and type of envelope at a time.
• Before loading envelopes, flatten leading edges (the side going into the ma-
chine) by pressing a pencil or ruler across them.
• Before loading envelopes, check they are rectangular in shape.
180
2
, 24 lb.) in the bypass tray at
AFU131S
AFU145S