Plug In Module; Attaching The Bracket-Pim - Samsung ME95C User Manual

Plug In Module

To use Plug In Module, make sure you connect a Samsung PIM (sold separately).
To connect a device made by another manufacturer, ensure the device is compatible with Open Pluggable Specification (OPS) standards.
― For details on how to connect a device, refer to the user manual provided with the PIM upon purchase.
― To obtain optimum audio quality, configure the HDMI audio settings using the Windows Control Panel on the OPS device. For products made by other manufacturers, this only applies to HDMI-compatible devices.
― To enable sound output from the product with an OPS device that does not support HDMI, configure the analog audio settings using the Windows Control Panel, go to
input source to PC, DVI PC or DVI.

Attaching the BRACKET-PIM

Unfasten the highlighted screws, and then
detach the COVER PIM.
Unfasten the highlighted screws. Place the PIM as shown.
Plug In Module > Edit Name and set the
Place the BRACKET-PIMs as shown, and then
fasten the screws.
55