Metrologic MS9520 Installation And User Manual page 16

A
SSEMBLING THE
There are 2 options for assembling the stand. The first option allows the stand to
be self-supporting and moved freely or placed anywhere on the countertop. The
second option is used if the stand will be bolted/hard-mounted to the countertop.
Stand Option 1: Self-supported
Step 1
Slide the apron (
over the stand (
MLPN
Step 2
Position the stand so it sits under
the tab on the apron. Then secure
the apron to the stand using the
M3 x 6 mm screws
( 18-18670) and the #5
MLPN
washers ( 18-18671) provided
MLPN
Stand Option 2: Hard-mounted to countertop
2.00 in
2.00 in
#8 Wood
Screw
Continued on next page
S
TANDS
For use with kit #46-46128
50-50440)
MLPN
36-00454).
For use with kit #46-46351
Base
Apron
Tab
M3 x 6 mm
.
Screw
Step 1
Drill four #39 holes in the countertop.
Step 2
Secure the base (
to the countertop with the four
#8 wood screws (
Apron
Stand
36-36080)
MLPN
18-18057) provided.
MLPN
Stand
#5 Washer
11