Table of Contents
Advertisement
Quick Links
INSTALLER: THESE INSTRUCTIONS MUST BE CONVEYED TO AND REMAIN WITH THE HOMEOWNER.
CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARDS, CGA 2.22, AND ANSI Z21.50 RESPECTIVELY FOR VENTED GAS FIREPLACES.
CERTIFIED FOR CANADA AND UNITED STATES USING ANSI / AGA / CGA METHODS
WARNING: If the information in these instructions is not followed exactly, a fire or
explosion may result causing property damage, personal injury or death.
Do not store or use gasoline or other flammable vapours and liquids in the vicinity of
• Do not try to light any appliance.
• Do not touch any electrical switch.
• Do not use any phone in your building.
Installation and service must be performed by a qualified installer, service agency or the
gas supplier.
Fax: (705)722-6031
Email: ask@napoleon.on.ca
Web: www.napoleon.on.ca
MILLIVOLT SYSTEM
INSTALLATION AND OPERATION INSTRUCTIONS FOR
VENTED GAS FIREPLACE - GB20
NATURAL GAS MODEL
PROPANE GAS MODEL
FOR YOUR SAFETY
this or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
Wolf Steel Ltd., RR#1, 9 Napoleon Rd.,
Barrie, ON., Canada L4M 4Y8 (705)721-1212
R-2000
GB20-N
GB20-P
• Immediately call your gas supplier from a
neighbour's phone. Follow the gas
supplier's instructions.
• If you cannot reach your gas supplier, call
the fire department.
1
WS-415-137 / 05.15.00
Advertisement
Table of Contents
Related Manuals for Napoleon GB20-N
Summary of Contents for Napoleon GB20-N
-
Page 1: Millivolt System
CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARDS, CGA 2.22, AND ANSI Z21.50 RESPECTIVELY FOR VENTED GAS FIREPLACES. MILLIVOLT SYSTEM INSTALLATION AND OPERATION INSTRUCTIONS FOR VENTED GAS FIREPLACE - GB20 GB20-N NATURAL GAS MODEL GB20-P PROPANE GAS MODEL CERTIFIED FOR CANADA AND UNITED STATES USING ANSI / AGA / CGA METHODS WARNING: If the information in these instructions is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. -
Page 2: Table Of Contents
TABLE of CONTENTS PG 8 OPTIONAL BLOWER INSTALLATION PG 2-4 INTRODUCTION Warranty OPTIONAL FAN INSTALLATION General Instructions OPTIONAL THERMOSTATIC SENSOR General Information Care of Glass & Plated Parts 10-11 OPERATION / MAINTENANCE VENTING Operating Instructions Vent Safety Switch Maintenance Venting Action Check 11 ADJUSTMENTS INSTALLATION Pilot Burner Adjustment... - Page 3 NAPOLEON gas fireplaces are manufactured under the strict Standard of the world recognized ISO9002 Quality Assurance Certificate. NAPOLEON products are designed with superior components and materials, assembled by trained craftsmen who take great pride in their work. The burner and valve assembly are leak and test-fired at a quality test station.
-
Page 4: General Instructions
GENERAL INSTRUCTIONS This fireplace is approved for bedroom and bed-sitting room installation. THIS GAS FIREPLACE SHOULD BE INSTALLED AND No external electricity (110 volts or 24 volts) is required SERVICED BY A QUALIFIED INSTALLER to conform with for the gas system operation. Expansion / contraction local codes. -
Page 5: Venting
VENTING The GB20 is a vented appliance and must be connected to a chimney in accordance with the current installation codes. In absence of local codes, install to the current National Fuel Gas Code, ANSI Z223.1, or the current CAN/CGA B149, Installation Codes. This model can be FIGURE 3 common-vented. -
Page 6: Gas Installation
GAS INSTALLATION Proceed once the vent installation is complete. 1. Move the fireplace into position and secure using the nailing tabs and/or secure to the floor through the ¼"ø holes located at either end of the base. 2. Route a 3/8" N.P.T. black iron gas line, 1/2" type-L copper tubing or equivalent to the fireplace. -
Page 7: Finishing
H O O D , A N D O P T I O N A L LOUVRE REMOVAL & INSTALLATION PHAZER logs exclusive to Napoleon Fireplaces, pro- vide a unique and realistic glowing effect that is different in every installation. FIGURES 12 DOOR HINGE... -
Page 8: Optional Blower Installation
OPTIONAL BLOWER INST ALLATION INSTALLATION TO BE DONE BY A QUALIFIED INSTALLER Attach the connectors from the black and white wires to the and must be electrically connected and grounded in accord- thermodisc and secure the thermodisc bracket to the secur- ance with local codes. -
Page 9: Optional Fan Installation
OPTIONAL F AN INST ALLATION OPTIONAL THERMOSTATIC FIGURE 23 ELECTRICAL INSTALLATION TO BE DONE BY A QUALI- SENSOR FIED INSTALLER and must be connected and grounded in accordance with local codes. In the absence of local RECEPTACLE / codes, use the current CSA C22.1 CANADIAN ELECTRICAL CODE JUNCTION BOX VARIABLE SPEED/... -
Page 10: Operation / Maintenance
OPERA TION / MAINTENANCE OPERATING INSTRUCTIONS After extended periods of non-operation such as following a vacation or a warm weather season, the fireplace may When lit for the first time, the fireplace will emit a slight emit a slight odour for a few hours. This is caused by dust odour for a few hours. -
Page 11: Maintenance
MAINTENANCE Turn off the gas and electrical 3. Check to see that all burner ports are burning. Clean out any of the ports which may not be burning or are not burn- power before servicing the fireplace. ing properly. CAUTION: Label all wires prior to disconnection when serv- 4. -
Page 12: Replacements
REPLACEMENTS ORDERING REPLACEMENT PARTS Contact your dealer or the factory for questions concerning prices and policies on replacement parts. Normally all parts can be ordered through your Napoleon dealer or distribu- tor. When ordering replacement parts always give the fol- lowing information: 1. -
Page 13: Accessories
ACCESSORIES: PART NO. DESCRIPTION GD235-K GD3AB 3" TRIM KIT - ANTIQUE BRASS GD3PB 3" TRIM KIT - POLISHED BRASS GD3SS 3" TRIM KIT - ST AINLESS STEEL GD43-1AB 4" - 3D TRIM KIT - ANTIQUE BRASS GD43-1PB 4" - 3D TRIM KIT - POLISHED BRASS GD43-1SS 4"... -
Page 14: Trouble Shooting Guide
TROUBLE SHOOTING GUIDE EFORE ATTEMPTING TO TROUBLESHOOT PURGE YOUR UNIT AND INITIALLY LIGHT THE PILOT AND THE MAIN BURNER WITH THE GLASS DOOR REMOVED SYMPTOM PROBLEM TEST SOLUTION Main burner goes Pilot flame is not large - turn up pilot flame. out;... - Page 15 SYMPTOM PROBLEM TEST SOLUTION Pilot goes Gas piping is undersized. - turn on all gas appliances and see if pilot flame flutters, dimin- w h i l e s t a n d i n g ; ishes or extinguishes, especially when main burner ignites. Monitor Main burner is in appliance supply working pressure.
- Page 16 WS-415-137 / 05.15.00...
- Page 17 NOTES: WS-415-137 / 05.15.00...