Table of Contents
Advertisement
Quick Links
INSTALLER: THESE INSTRUCTIONS MUST BE CONVEYED TO AND REMAIN WITH THE HOMEOWNER.
CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARDS, CGA 2.22, AND ANSI Z21.50 RESPECTIVELY FOR VENTED GAS FIREPLACES.
CERTIFIED FOR CANADA AND UNITED STATES USING ANSI / AGA / CGA METHODS
WARNING: If the information in these instructions is not followed exactly, a fire or
explosion may result causing property damage, personal injury or death.
Do not store or use gasoline or other flammable vapours and liquids in the vicinity of
• Do not try to light any appliance.
• Do not touch any electrical switch.
• Do not use any phone in your building.
Installation and service must be performed by a qualified installer, service agency or the
gas supplier.
Fax: (705)722-6031 Email: ask@napoleon.on.ca
Web: www.napoleon.on.ca
MILLIVOLT SYSTEM
INSTALLATION AND OPERATION INSTRUCTIONS FOR
VENTED GAS FIREPLACE - GB20
NATURAL GAS MODEL
PROPANE GAS MODEL
FOR YOUR SAFETY
this or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
Wolf Steel Ltd., RR#1, 9 Napoleon Rd.,
Barrie, ON., Canada L4M 4Y8 (705)721-1212
R-2000
GB20-N
GB20-P
• Immediately call your gas supplier from
a neighbour's phone. Follow the gas
supplier's instructions.
• If you cannot reach your gas supplier, call
the fire department.
1
WS-415-137 / 05.15.00
Advertisement
Table of Contents
Related Manuals for Napoleon GB20-N
Summary of Contents for Napoleon GB20-N
-
Page 1: Millivolt System
• If you cannot reach your gas supplier, call the fire department. Installation and service must be performed by a qualified installer, service agency or the gas supplier. Wolf Steel Ltd., RR#1, 9 Napoleon Rd., Barrie, ON., Canada L4M 4Y8 (705)721-1212 Fax: (705)722-6031 Email: ask@napoleon.on.ca Web: www.napoleon.on.ca R-2000 WS-415-137 / 05.15.00... -
Page 2: Table Of Contents
TABLE of CONTENTS PG 8 OPTIONAL BLOWER INSTALLATION PG 2-4 INTRODUCTION Warranty OPTIONAL FAN INSTALLATION General Instructions OPTIONAL THERMOSTATIC SENSOR General Information Care of Glass & Plated Parts 10-11 OPERATION / MAINTENANCE VENTING Operating Instructions Vent Safety Switch Maintenance Venting Action Check 11 ADJUSTMENTS INSTALLATION Pilot Burner Adjustment... -
Page 3: Warranty
After the first year, NAPOLEON will not be responsible for installation, labour or any other costs or expenses related to the reinstallation of a warranted part, and such expenses are not covered by this warranty. -
Page 4: General Instructions
" thick tempered glass. Use only replacement glass from the gas supply piping system by closing its individual available from your Napoleon dealer. manual shutoff valve during any pressure testing of the Do not substitute materials. gas supply piping system at test pressures equal to or Clean the glass after the first 10 hours of operation with a less than 1/2 psig (3.5 kPa). -
Page 5: Venting
VENTING The GB20 is a vented appliance and must be connected to a chimney in accordance with the current installation codes. In absence of local codes, install to the current National Fuel Gas Code, ANSI Z223.1, or the current CAN/CGA B149, Installation Codes. This model can be FIGURE 3 common-vented. -
Page 6: Gas Installation
GAS INSTALLATION Proceed once the vent installation is complete. 1. Move the fireplace into position and secure using the nailing tabs and/or secure to the floor through the ¼"ø holes located at either end of the base. 2. Route a 3/8" N.P.T. black iron gas line, 1/2" type-L copper tubing or equivalent to the fireplace. -
Page 7: Finishing
LOG PLACEMENT DOOR, HOOD, OPTIONAL LOUVRE REMOVAL & INSTALLATION PHAZER logs exclusive to Napoleon Fireplaces, pro- vide a unique and realistic glowing effect that is different in every installation. FIGURES 12 FIGURE 13 DOOR HINGE DOOR OPENING AND CLOSING: Open the valve control door. -
Page 8: Optional Blower Installation
OPTIONAL BLOWER INSTALLATION INSTALLATION TO BE DONE BY A QUALIFIED INSTALLER Attach the connectors from the black and white wires to the and must be electrically connected and grounded in accord- thermodisc and secure the thermodisc bracket to the secur- ance with local codes. -
Page 9: Optional Fan Installation
GD65 Fan Kit, shown above, which may be or- curing stud located next to the receptacle/junction box at dered from your Wolf Steel / Napoleon dealer. the bottom left of the unit using the lock washer and wing nut. -
Page 10: Operation / Maintenance
OPERATION / MAINTENANCE OPERATING INSTRUCTIONS After extended periods of non-operation such as following a vacation or a warm weather season, the fireplace may When lit for the first time, the fireplace will emit a slight emit a slight odour for a few hours. This is caused by dust odour for a few hours. -
Page 11: Maintenance
The flow of combustion and ventilation air must on. A 5 to 10 second total light-up period is satisfactory. If not be obstructed. ignition takes longer, consult your Napoleon dealer / dis- tributor. 1. In order to properly clean the burner and pilot assembly, 7. -
Page 12: Replacements
ORDERING REPLACEMENT PARTS Contact your dealer or the factory for questions concerning prices and policies on replacement parts. Normally all parts can be ordered through your Napoleon dealer or distribu- tor. When ordering replacement parts always give the fol- lowing information: 1. -
Page 13: Accessories
ACCESSORIES: PART NO. DESCRIPTION GD235-K GD3AB 3" TRIM KIT - ANTIQUE BRASS GD3PB 3" TRIM KIT - POLISHED BRASS GD3SS 3" TRIM KIT - STAINLESS STEEL GD43-1AB 4" - 3D TRIM KIT - ANTIQUE BRASS GD43-1PB 4" - 3D TRIM KIT - POLISHED BRASS GD43-1SS 4"... -
Page 14: Trouble Shooting Guide
TROUBLE SHOOTING GUIDE EFORE ATTEMPTING TO TROUBLESHOOT PURGE YOUR UNIT AND INITIALLY LIGHT THE PILOT AND THE MAIN BURNER WITH THE GLASS DOOR REMOVED SYMPTOM PROBLEM TEST SOLUTION Main burner goes Pilot flame is not large - turn up pilot flame. out;... - Page 15 SYMPTOM PROBLEM TEST SOLUTION Pilot goes Gas piping is undersized. - turn on all gas appliances and see if pilot flame flutters, dimin- while standing; ishes or extinguishes, especially when main burner ignites. Monitor Main burner is in appliance supply working pressure. 'OFF' position.
- Page 16 Wolf Steel Fireplace Service History This fireplace must be serviced annually depending on usage. Service Technician Date Dealer Name Service Performed Special Concerns Name...
- Page 17 NOTES: WS-415-137 / 05.15.00...
Need help?
Do you have a question about the GB20-N and is the answer not in the manual?
Questions and answers