Table of Contents
Advertisement
fig.11-g09e
Characters you can use: Letters of the alphabet (upper
case) space numerals ! # $ % & ' ( ) @ ^ _ { }
FWD: This advances the location for entering a character.
Pressing the dial advances the entry location by one.
BACK: This moves back the location for entering a character.
Pressing the dial moves back the entry location by one.
INS: This inserts a space. Pressing the dial inserts a single
space.
DEL: This deletes a character. Pressing the dial deletes a
single character.
END: To finish the process.
5. To finish the save process, then in step 4, turn the
SELECT dial to choose End, then press the dial.
fig.11-g10e
6. When the prompt appears on the screen, press the
ENTER button to enable the settings.
To quit without making the settings, use the SELECT dial to
choose "NO," then press the ENTER button.
Once the settings have been successfully modified, you're
returned to the setting item selection screen.
7. Press the MODE button.
This ends the setting process and returns you to the usual
screen.
* While making the settings, you can go back to the previous
entry location (highlighted) by pressing the PAUSE (BACK)
button.
* If you press the MODE button while making settings, a
message asking you to confirm that you want to exit the
setting process appears. Note that if you choose "YES," then
press the ENTER button, you are returned to the usual screen,
and all setting changes you've made up to that point will be
discarded.
Creating Combinations of
Phrases (Phrase Combination)
You can create new phrases by combining a number of
phrases already recorded and storing the result as a different
phrase. There are two types of methods for creating phrase
combinations: pattern phrases and song phrases.
Modifying Recorded Phrases (Phrase Settings)
To check phrases during various settings, you can play back
and stop phrases using the PLAY and STOP buttons (audio
phrases only). Note that you cannot change settings during
phrase playback. → (p. 54)
If a card in AR-2000 format is inserted in either slot A or B (or
both), the AR-3000 can be used only for playback, and it is
not possible to record phrases or make any settings (except
for card conversion). Also, if you insert a card in AR-2000
format into slot A or B (or both) during recording settings,
recording, or recording standby, or while making settings
(except for card conversion), operation will halt with an error
message, and cannot be resumed until such cards are
removed. To record or edit cards in AR-2000 format on the
AR-3000, follow the steps in "Card Convert" (p. 78).
Combinations of Phrase Units
(Pattern Phrases)
You can combine a number of phrases to create a new phrase
(pattern phrase). A pattern phrase is a stored combination of
phrases that have already been recorded. A pattern phrase is
also treated as a single phrase.
Creating pattern phrases makes it possible to create and start
a variety of combined-phrase patterns while saving card
memory space.
Specific Examples
First, make actual recordings of three phrases like the ones
described below.
A0001: "Thank you for coming"
A0002: "Today"
A0003: "Despite the bad weather"
Combine these three to create a pattern phrase.
61
Advertisement
Table of Contents
