Table of Contents
Advertisement
MIDI Implementation
* Not received when recording mode is not "Standby".
* The same processing will be carried out as when Start is received.
Stop
status
FCH
* Not received when recording mode is not "record".
3.4
Messages
received
trouble in MIDI connection.
System Realtime message
Active Sensing
Status
FEH
* When Active Sensing is received, the unit will begin monitoring the intervals of all
further messages. While monitoring, if the interval between messages exceeds 400 ms,
the same processing will be carried out as when All Sounds Off, All Notes Off and Reset
All Controllers are received, and message interval monitoring will be halted.
4. Transmit data (MIDI Recorder Section)
When AR-200/3000 is in MIDI Recorder mode, MIDI Messages is not transmitted.
5. Exclusive Communication
Exclusive message model IDs that can be used on the AR-200 and AR-3000 are OOH, 38H
(AR-200), 00H, and 37H (AR-3000). The Device Id can be set to 00H to 1FH.
Only received when AR-200/3000 is in Media Player Section.
Data Set 1 DT1 (12H)
Byte
Description
F0H
Status of System Exclusive Message
41H
Universal System Exclusive Message Real time Header
dev
device ID (dev : 00H--1FH)
mdl
Model ID (mdl : 00H, 38H) AR-200
(mdl : 00H, 37H) AR-3000
12H
Command ID (DT1)
aaH
address MSB
:
:
ccH
Address LSB
ddH
Data
:
:
kkH
Data
sum
Check Sum
F7H
EOX (End of System Exclusive Message)
5.1 Parameter Address Map
This map indicates address,size, data (range), Parameter, Description,and default Value of
parameters which can be transferred using "Data Set1(DT1)."
All the numbers of address, size, Data, and default Value are indicated in 7-bit
Hexadecimal-form.
(AR-200 Model ID=00H,38H)
(AR-3000 Model ID=00H,37H)
142
for
detecting
Address Block Map
An outlined address map of the Exclusive Communication is as follows;
Exclusive Address Table
for recording setting
Address(H)
SIZE(H)
DATA(H)
===================================================================
00 00 10
00 00 08
00 - 07
11#
00 - 7f
12#
00 - 05
13#
00 - 04
14#
00 - 01
15#
00 - 03
16#
00 - 03
17#
00 - 01
===================================================================
Phrase number
DATA(H)
A0001-A1000
00 00 - 07 67
B0001-B1000
07 68 - 0H 4F
* Only received packet data.
* When reception of this packet is completed, the AR-3000 goes into REC PAUSE mode.
However, if the phrase already exists, the AR-3000 ignores this SysEx message.
(AR-2000 compatible)
Address(H)
SIZE(H)
DATA(H)
===================================================================
00 00 00
00 00 08
00 - 07
01#
00 - 7f
02#
00 - 04
03#
00 - 02
04#
00 - 01
05#
00 - 03
06#
00 - 01
07#
00 - 01
===================================================================
Phrase number
DATA(H)
A0001 - A0500
00 00 - 03 73
B0001 - B0500
03 74 - 07 67
* Only received packet data.
* When reception of this packet is completed, the AR-3000 goes into REC PAUSE mode.
However, if the phrase already exists, the AR-3000 ignores this SysEx message.
* ANALOG-IN for REC Source is set to LINE-IN on the AR-3000.
(Only AR-3000)
Parameter
Description
Phrase Number
upper 4bits
Phrase Number
lower 7bits
Grade
0:ANNOUNCE
1:LONG2
2:LONG1
3:STANDARD
4:HIGH
5:S-HIGH
R-DAC mode
0:Linear
1:Mode1
2:Mode2
3:Mode3
4:H-LINEAR
REC type
0:MONO
1:STEREO
REC Trigger Level
0:OFF
1:LOW
2:MID
3:HIGH
REC Source
0:LINE-IN
1:LINE+MIC-IN
2:DIGITAL-IN
3:MIDI-IN
TimeBase
0:192
1:240
Parameter
Description
Phrase Number
upper 3bits
Phrase Number
lower 7bits
Grade
0:ANNOUNCE
1:LONG2
2:LONG1
3:STANDARD
4:HIGH
R-DAC mode
0:Linear
1:Mode1
2:Mode2
REC type
0:MONO
1:STEREO
REC Trigger Level
0:OFF
1:LOW
2:MID
3:HIGH
REC Source
0:ANALOG-IN
(MIDI REC OFF)
1:MIDI-IN
(MIDI REC ON)
TimeBase
0:192
1:240
Advertisement
Table of Contents
