Disassembly Instructions - Aiwa HV-FX5850 Service Manual

DISASSEMBLY INSTRUCTIONS -1/1

1. Top Case Removal
1) Remove 4 screws holding the top case.
2. Panel Front Removal (see Fig. 1)
1) Release 7 tabs, and then remove the panel front.
PANEL
FRONT
3. Key1 C.B. and Key2 C.B. Removal (see Fig. 2)
1) Release 2 tabs, and then remove Key1 C.B. from the connec-
tor (PKM02) in the direction of arrow 1 .
2) Release the tab, and then remove Key2 C.B. from the connec-
tor (PKM01) in the direction of arrow 2 .
TAB
1
PKM02
TAB
KEY1 C.B
MAIN C.B
KEY2 C.B
TAB
Fig. 1
2
PKM01
TAB
Fig. 2
4. Mechanism Removal (see Fig. 3)
1) Disconnect the drum FF cable from the connector (PMD01)
on the Main C.B.
2) Disconnect the ACE head FF cable from the connector (P3D02)
on the Main C.B.
3) Remove 6 screws A .
P3D02
FF CABLE
A
5. Main C.B. Removal (see Fig. 4)
1) Remove 2 screws B holding the panel assy, distri-butor.
2) Release 5 tabs, and then simultaneously lift the panel assem-
bly, distributor and Main C.B. to remove them.
B
TAB
TAB
MAIN C.B
-5-
PMD01
A
FF CABLE
A
Fig. 3
PANEL
DISTRIBUTOR
TAB
Fig. 4
TAB
TAB