Deck Mechanism Disassembly; Drum Assembly - Aiwa HV-FX5850 Service Manual

DECK MECHANISM DISASSEMBLY

Holder FPC or
(only for 2HD Models)
1. Drum Assembly (Fig. A-1-1)
1) Unhook the (H1) on the back side of the Chassis and
separate the Cap FPC.
2) Remove three Screws (S1) and lift up the Drum
Assembly.
3) Remove two Screws (S2) and Separate the Stator of
Drum Motor.
4) Remove two Screws (S3) and Separate the Rotor of
Drum Motor from the Drum Sub Assembly.
NOTE
(1) When reassembling Cap FPC, two Holes of Drum FPC
are inserted to the two Bosses of Holder FPC correctly.
(Refer to Fig. B-1)
(S2)
(S2)
(S3)
(S3)
(For Jog Shuttle Models)
Optional Parts
Holder FPC or Holder FPC
(only for 4HD-Mono Models) (only for 4HD-Hi-Fi Models)
(Fig. A-1-1)
Fig. A-1
(Fig. B-1)
-81-
Stator
Drum Motor
Rotor
Drum Sub Assembly
(Fig. A-1-1)
Drum FPC
(S1)
(S1)
(S1)
Drum FPC
Holder FPC
Figure in the opposite direction
H1
Cap FPC
Cap FPC