Disassembly Instructions - Aiwa HV-FX7700 Service Manual

DISASSEMBLY INSTRUCTIONS

1. Top Case Removal
1) Remove 4 screws holding the top case.
2. Panel Front Removal (see Fig. 1)
1) Release 7 tabs, and then remove the panel front.
PANEL
FRONT
3. Key1 C.B. and Key2 C.B. Removal (see Fig. 2)
1) Release 2 tabs, and then remove Key2 C.B. from the con-
nector (PKM02) in the direction of arrow 1 .
2) Release the tab, and then remove Key1 C.B. from the
connector (PKM01) in the direction of arrow 2 .
TAB
1
PKM02
TAB
KEY2 C.B
MAIN C.B
KEY1 C.B
TAB
Fig. 1
2
PKM01
TAB
Fig. 2
4. Mechanism Removal (see Fig. 3)
1) Disconnect the drum FF cable from the connector
(PMD01) on the Main C.B.
2) Disconnect the ACE head FF cable from the connector
(P3D02) on the Main C.B.
3) Remove 6 screws A .
PMD01
FF CABLE
FF CABLE
A
5. Main C.B. Removal (see Fig. 4)
1) Remove 2 screws B holding the panel assy, distri-butor.
2) Release 5 tabs, and then simultaneously lift the panel as-
sembly, distributor and Main C.B. to remove them.
B
TAB
TAB
MAIN C.B
4
P3D02
A
A
Fig. 3
PANEL ASSY,
DISTRIBUTOR
TAB
TAB
TAB
Fig. 4