Disassembly Instructions - Aiwa HV-MC90 Service Manual

DISASSEMBLY INSTRUCTIONS -1/1

1. Top Case Removal
1) Remove 4 screws holding the top case.
2. Panel Front Removal (see Fig. 1)
1) Release 7 tabs, and then remove the panel front.
PANEL
FRONT
3. Mechanism Removal (see Fig. 2)
1) Disconnect the drum FF cable from the connector (PMD01)
on the Main C.B.
2) Disconnect the ACE head FF cable from the connector (P3D02)
on the Main C.B.
3) Remove 6 screws A .
P3D02
FF CABLE
FF CABLE
A
TAB
Fig. 1
PMD01
A
A
Fig. 2
4. Main C.B. Removal (see Fig. 3)
1) Remove 2 screws B holding the panel assy, distri-butor.
2) Release 5 tabs, and then simultaneously lift the panel assem-
bly, distributor and Main C.B. to remove them.
B
TAB
TAB
MAIN C.B
-5-
PANEL
DISTRIBUTOR
TAB
TAB
TAB
Fig. 3