Setting Up The Camera Using Rm-P2580; Setup Procedure - JVC TK-C625 Instructions Manual

Setting Up the Camera Using RM-P2580

Setup Procedure

MENU button
SET button
POWER lamp
CAMERA POSITION
SETUP
POWER
ALARM
MENU SET
KEY LOCK
LENS CAMERA/POSITION
1 2 3
CAMERA
SPEED
4 5 6
IRIS OPTION
CLOSE OPEN
1
FOCUS
7 8 9
NEAR FAR AUTO
AF
PAN
0
ZOOM TELE CLEAR ENTER
WIDE
/HOME
cursor
SETUP
POSITION SETUP. .
CAMERA. .
CONTROL UNIT. .
SETUP menu of the remote control unit
Indication of presence of
submenus
MENU
CAM.FUNCTION1..
CAM.FUNCTION2..
CAM.TITLE/ALARM..
CAM.ALC/VIDEO..
AUTO PAN/PATROL/TRACE..
POS.FUNCTION SET..
FACTORY SETTINGS..
< > < >
MENU EXIT SET SUB MENU
MENU screen for the camera
Change mark
CAMERA FUNCTION1
V. PHASE
POS. TITLE LOC.
PRIVATE MASK..
MANUAL DISPLAY
< >
MENU RETURN
Example of a submenu
In systems using an RM-P2580 remote control unit, the menus
Power switch
for use during camera setup can be displayed on the remote
(Rear panel)
control unit. (Please refer to the Instructions for RM-P2580.)
8 Setting the camera menus from RM-P2580
RM-P2580
REMOTE CONTROL UNIT
1
AUTO F-1 F-2 F-3
PAN/TILT 2
POSI-
TION
OPTION
2
AUTO
PATROL
3
PAN lever
4
5
6
7
MEMO
● To prevent malfunction of the camera, do not perform menu operation until
- - -
UP-L
ON
Set the Power switch on the rear panel of the RM-P2580 to
ON.
●The POWER lamp lights up.
Press and hold the MENU button for 3 seconds.
●The LED of the MENU button lights up.
●The ASETUPB menu of the remote control unit is displayed on the
monitor connected to MONITOR OUTPUT 1.
Move the PAN lever downward to move the cursor (E) to
ACAMERA..B in the menu.
●Tilting the lever upward (J) moves the cursor upward.
●Tilting the lever downward (K) moves the cursor downward.
Press the SET button.
●The AMENUB screen for the camera is displayed.
●Items followed by A..B have further submenus.
Tilt the PAN lever up or down to select an item.
Tilt the PAN lever to the left or right to change the value of
the item.
●Tilting the lever toward the left (H) decreases the value.
●Tilting the lever toward the right (I) increases the value.
Upon changing the set value of items, a change mark (*) will appear as
indicated in the left diagram. Please refer to the following pages for
details on setting of the sub-menu.
Press the MENU button.
After completing the setup of the menu items, press the MENU button to
return to the previous menu screen.
initialization of the camera has completed.
21
EN