Download  Print this page

Whirlpool ARC 5200 Instructions For Use Manual page 13

Hide thumbs

Advertisement

Install the appliance away from heat sources.
Install the appliance in a dry, well-ventilated place.
Ensure that the appliance is level.
Adjust the front feet if necessary.
Leave at least 5 cm clearance above the appliance.
The sides of some models are extended at the rear so the
appliance can be placed directly against the rear wall.
Otherwise, fit the spacers (if supplied) on the upper part of
the condenser at the rear of the appliance.
.or models without spacer walls, the distance between the
unit and the wall must be at least 4.5 cm.
Clean the inside (see chapter “How to clean the appliance”).
.it the accessories supplied.
Remove the compressor locking pin (if provided).
Electrical connections must be made in accordance with local
regulations.
Ensure that the voltage indicated on the appliance data plate
corresponds to the domestic supply voltage.
If the plug and socket are not of the same type, have the
socket replaced by a qualified electrician.
Do not use extension cables, multiple sockets or adapters.
21

Advertisement

loading