Navigation; Checking The Gps Status - Sony nav-u Quick Start Manual

Navigation
Checking the GPS status
About the GPS status indication
The GPS status can be checked by the color of the current position icon.
If the current position is not displayed, touch VOICE/POS. to show the icon.
Current position icon
Indication
Signals are insufficient for navigation.
Reception temporarily interrupted (e.g., in a tunnel).
In the case of NV-U94T, the built-in sensor (POSITION plus)
calculates the current position instead.
Signals are sufficient for navigation.
Note
Acquisition of GPS signal may take up to 10 minutes, especially for the first time. Make sure that you are in
an open space for faster acquisition.
Tip
If GPS signal reception is poor after turning on the unit, the information bar appears at the top of the
display.
You can also check the GPS status by the message on the information bar.
By touching the information bar, you can jump to the display where you can view detailed GPS status
information (page 14).
continue to next page
t
13