REMOVAL & INSTALLATION
3. FRONT PANEL BLOCK
1. Remove the 2 FRONT PANEL mounting screws.@)
2. Remove the claw of PRE-AMPLIFIER P.W.Board.@)
5.
PRE-AMPLIFIER
&
1. Remove the 2 REAR-SOCKET mounting screws.@)
2. Remove the PRE-AMPLIFIER P.W.board.(@)
3. Remove the 4 REAR-SOCKET mounting screws.(@)
4. Remove the 2 HEAT SINK mounting screws.(@)
5. Remove the POWER P.W.board.(@)
7 . T A P E M E C H A N I S M B L O C K
1. Open the 2 CASSETTE LIDS.(O)
2. Remove the 6 TAPE MECHANISM mounting screws.(@)
POWER
P.W.BOARDS
4 . C D M E C H A N I S M
1. Remove the 4 CD MECHANISM mounting screws.@)
6 . P O W E R T R A N S F O R M E R
1. Remove the 4 POWER TRANSFORMER mounting screws.
2. Remove the POWER TRANSFORMER.(@)
8. WIRING LAYOUT
Arrange the lead wires so that they are not near the
l
heat sink of the POEWR P.W.board.
POWER P.W.B