Volume Adjust; Subwoofer Level; Amplifier Gain - JVC KD-AVX77 Instructions Manual

Fader/Balance
Fader:
Adjust the front and rear
speaker output balance.
Balance:
Adjust the left and right
speaker output balance.
Volume Adjust
*1
Subwoofer Level
High Pass Filter
Crossover
Amplifier Gain
*2
Rear Speaker
*3
Dragging also makes
adjustments.
• F06
to
R06;
Initial
00
(fader)
• L06
to
R06;
Initial
00
(balance)
[.1....]: Adjusts fader.
[ "'/~]: Adjusts balance.
[
.$~
]:
Resets the adjustments.
• When using atwo-speaker system, set the fader to the center
(00).
Adjust and store the auto-adjustment volume level for each source, comparing
to the
FM
volume level. The volume level will automatically increase or decrease
when you change the source.
• <Fix>
appears when an
FM
broadcast is selected as the source.
• -12
to +
12;
Initial
00
You can adjust the output level of the subwoofer when it is activated.(
~
'7)
• -06
to
+08;
Initial
00
• Through :
Select when the subwoofer is not connected.
• On : Select when the subwoofer is connected.
Select the crossover frequency between the frontlrear speakers and the
subwoofer.
• 80Hz, 120Hz, 1SOHz
You can change the maximum volume level ofthis unit.
• Off Deactivates the built-in amplifier.
• Low Power : VOL 00
to
30
(Select this if the maximum power of the
speakers is less than
50
W.)
• High Power : VOL 00
to
50
You can activateldeactivate the rear speakers.
• OO,On
*1
For ''DISC/USB'': You can make the adjustments separately depending on the audio format-Dolby digital and
the others.
*2
The volume level automatically changes to "30" ifyou change to <Low Power> with the volume level set higher
than "30."
*3
This setting takes effectonly when DualZone is activated.
(~4 7)
24