TATA Motors INDICA VISTA Owner's Manual page 44

03
INSTRUMENTS & CONTROLS
Multifunctional LCD, Odometer,
Dimmer and Tripmeter (A and B):
Applicable for VISTA TECH
The instrument cluster's LCD has a
two line display. The first line displays
ODO, TRIP A, B (in Kms). The second
line displays odometer reading, TRIP
A, B reading as well as brightness
intensity levels.The LCD also displays
Tripmeter A, Tripmeter B and intensity
level when the MODE knob is pressed.
The selection and control of functions
are done through 'MODE' and 'SET'
knobs provided on either side of the
gauge. Refer table.
Odometer and Trip meter (on LCD):
The odometer records the total
44
distance the car has been driven. The
trip meter can be used to measure the
distance travelled on each trip or
between fuel fillings. Keep track of the
odometer reading and follow the
maintenance schedule regularly for
meeting service requirements.
You can select required function on LCD by using MODE and SET knobs
available on cluster, as indicated in the table below.
Please note that each knob has to be pressed and released to change the
function.
Display selection by "MODE" and "SET" knobs :
Sr. Indication on With "MODE" knob
No. LCD pressed
1 Main Odometer Display changes to Trip A
2 Trip meter "A" Display changes to
Trip B (Ref. to A on next page)
3 Trip meter "B" Display changes to Dimmer, if
cluster Illumination is ON, else
changes to Main Odometer
4 Dimmer Display changes to Main
Odometer
INSTRUMENT CLUSTER (VISTA TECH)
With "SET" knob
pressed
-----
Resets Trip A distance
Resets Trip B distance
(Ref. to B on next page)
Adjusts Dimming level
(Ref. to C on next page)