Services - TATA Motors INDICA VISTA Owner's Manual

Hide thumbs Also See for INDICA VISTA:
Table of Contents

Advertisement

SEAT BELTS
How to use seat belts:
1 LATCH
2 UNLATCH
1. Pull the belt tongue across your
body and insert it into the buckle.
2. Check and ensure that the belt is
not twisted.
3. Position the lap portion of the belt
as low as possible across your hip
bone.
4. Pull up the shoulder part of the belt
to remove the slack. Make sure that
the belt goes over your collar bones
and across chest.
5. To unlatch the belt, press the red
button on the buckle. Guide the belt
to the pillar as it retracts.
WARNINGS
1. The belts are meant (intended) for
adult occupants only.
2. Each belt should be used by one
occupant only. The belt must not
be put round a child, seated on
passengers lap.
3. When the belt has been in use in
a serious accident or shows signs
of severe fraying / damage or of
having been cut, replace with an
approved belt kit.
4. The belt must not be altered or
modified during use and if required
to be replaced, then it should be
replaced, by TATA MOTORS
Authorized Service outlets only.
01
SAFETY
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vista tech

Table of Contents