Honda Insight 2005 Reference Owner's Manual page 172

Main Menu Table of Contents
Tighten the wheel nuts securely in
11.
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
80 lbf·ft (108 N·m , 11 kgf·m)
Do not catch your clothes or
hands on the hooks on the rear
fender when you replace the
wheel.
TAB
SLOT
To install the rear wheel skirt,
12.
place the skirt against the body.
Line up the slots on the skirt with
the tabs in the body, then push the
skirt upward.
Make sure the wheel skirt is
installed correctly.
Changing a Flat Tire
Tighten the two stud fasteners.
13.
Align the marks on the stud
fastener with the marks on the
wheel skirt.
It is not recommended to drive your
vehicle without the wheel skirts.
It will af f ect the f uel consumption.
CONTINUED
171