Honda Insight 2005 Reference Owner's Manual page 156

Main Menu Table of Contents
BLADE
REINFORCEMENT
Examine the new wiper blades. If
4.
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
Slide the new wiper blade into the
5.
holder until the tabs lock.
6. Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
7. Lower the wiper arm down against
the windshield.
Wiper Blades
To replace a rear wiper blade:
1. Raise the wiper arm off the
windshield.
2. Pull one end of the blade out from
the holder.
3. Slide the blade out of the holder.
4. Slide the new blade into the holder.
Make sure it is engaged in the slot
along its full length.
CONTINUED
155