Honda Insight 2005 Reference Owner's Manual page 170

Main Menu Table of Contents
JACKING POINT
Place the jack under the jacking
5.
point nearest the tire you need to
change. It is pointed to by an
arrow molded into the underside
of the body. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
WHEEL NUT WRENCH EXTENSION
Use the extension and wheel
6.
wrench as shown to raise the
vehicle until the flat tire is off the
ground.
Changing a Flat Tire
Remove the wheel nuts, then
7.
remove the flat tire. Handle the
wheel nuts carefully; they may be
hot from driving. Place the flat tire
on the ground with the outside
surface facing up.
CONTINUED
169