Honda Insight 2005 Reference Owner's Manual page 149

Main Menu Table of Contents
Lights
Install the socket back into the
4.
headlight assembly. Turn it
clockwise to lock it in place.
5. Turn on the lights to make sure
the new bulb is working.
148
Replacing the Front Side Marker/
Turn Signal Light Bulb
1. To change the bulb on the driver's
side, start the engine, turn the
steering wheel all the way to the
right, then turn off the engine. To
change the bulb on the passenger's
side, turn the steering wheel to the
left.
2. Use a Phillips-head screwdriver to
remove the screw from the top of
the fender.
Pull the inner fender cover back.
3.
4. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
5. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.