Table of Contents
Advertisement
Alarm Clock
You can set your JVC PnP to turn on at a specific
time.
The last selected channel prior to shutdown will be
played when the alarm turns on your JVC PnP.
Set Alarm:
Press CH 5 / ∞ (or CH + / –) to select either "Alarm
On" or "Alarm Off (default)", then press SEL (or
SELECT).
Alarm Time (default—12:00pm):
Press CAT 3 / 2 (or CAT + / –) to set the hour, press
CH 5 / ∞ (or CH + / –) to set the minute, then press
SEL (or SELECT).
AM or PM will switch automatically as you advance
the time.
Note: If your JVC PnP cannot receive the SIRIUS
signals (satellite and terrestrial) correctly when the
alarm time comes, you may hear a series of alarm
tones.
Program Alert
You can program your JVC PnP to switch to a
specified channel at a specified time.
• To use your programmed setting, make sure to
set "Program Alert" to "Program Alert On".
The following settings are possible on this sub-menu
screen—
• Program Time/Day (default—12:00pm/Monday)
• Channel (default—Currently Playing Channel)
• Program Alert On/Off (default—Off)
Program Time/Day:
Press CH 5 / ∞ (or CH + / –) to select either "Time"
or "Day", then press SEL (or SELECT).
• Time: To set the time.
Press CAT 3 / 2 (or CAT + / –) to set the hour,
then press CH 5 / ∞ (or CH + / –) to set the
minute, then press SEL (or SELECT).
AM or PM will switch automatically as you
advance the time.
• Day: To set the day.
Press CH 5 / ∞ (or CH + / –) to select the day—
Monday, Tuesday, Wednesday, Thursday, Friday,
Saturday or Sunday, then press SEL (or SELECT).
Make sure to set both "Time" and "Day" correctly.
33
Advertisement
Table of Contents
