Table of Contents
Advertisement
4 Jump Settings
Press CH 5 / ∞ (or CH + / –) to select either
"Traffic" or "JumpSet", then press SEL (or
SELECT).
• Traffic: To use the JUMP button to search for a
traffic channel.
Press CH 5 / ∞ (or CH + / –) to select the city for
which you want traffic reports, then press SEL (or
SELECT).
• JumpSet: To use the JUMP button for any
channel other than a traffic channel.
When you select JumpSet, you can preset your
desired channel into the JUMP button.
1. Press MENU repeatedly to return to the Normal
Operation screen.
2. Tune in to the channel you want to preset.
3. Press and hold JUMP for about 2 seconds.
5 Display Settings
The following adjustments are possible on this sub-
menu screen—
• Contrast Control
• Dimming Control
28
Contrast Control: A horizontal bar graph is
displayed. Press CAT 3 / 2 (or CAT + / –) to adjust
the contrast, then press SEL (or SELECT).
(You can also use CH 5 / ∞ (or CH + / –) for
adjustment.)
Dimming Control: Press CH 5 / ∞ (or CH + / –) to
select either "Manual" or "Automatic", then press
SEL (or SELECT).
• Manual: To adjust the display brightness manually.
A horizontal bar graph is displayed. Press
CAT 3 / 2 (or CAT + / –) to adjust the brightness,
then press SEL (or SELECT).
(You can also use CH 5 / ∞ (or CH + / –) for
adjustment.)
• Automatic: To make your JVC PnP automatically
adjust the display brightness. You can set the lower
and higher limits for the display brightness.
– Adjust the lower dimming limit "L" and the
higher dimming limit "H" using CAT 3 / 2
(or CAT + / –).
– Switch between "L" and "H" using CH 5 / ∞
(or CH + / –).
– Press SEL (or SELECT) to confirm all settings.
Advertisement
Table of Contents
