Lubrication System - Toyota TACOMA 2010 Quick Reference Manual

6-1. Specifications

Lubrication system

2.7 L 4-cylinder (2TR-FE) engine
Oil capacity
Drain and refill
(Reference)
■
Engine oil selection
"Toyota Genuine Motor Oil" is used in your Toyota vehicle. Use
Toyota approved "Toyota Genuine Motor Oil" or equivalent to satisfy
the following grade and viscosity.
Oil grade: ILSAC multigrade engine oil
Recommended viscosity: SAE 5W-20 or 0W-20
Outside temperature
The 0W portion of the oil viscosity rating indicates the characteristic of the
oil which allows cold startability. Oils with a lower value before the W allow
for easier starting of the engine in cold weather.
The 20 in 0W-20 indicates the oil viscosity when the oil is at its operating
temperature. An oil with a higher viscosity may be better suited if the
vehicle is operated at high speeds, or under extreme load condition.
476
With filter
6.1 qt. (5.8 L, 5.1 Imp.qt.)
Without filter
5.4 qt. (5.1 L, 4.5 Imp.qt.)
SAE 5W-20 or 0W-20 engine oil
may be used. However, SAE
0W-20 is the best choice for
good fuel economy and good
starting in cold weather.
I n f o r ma t i o n P r o v i d e d b y :