1-7. Safety information
■
Laws and regulations pertaining to anchorages
The LATCH system conforms to FMVSS225 or CMVSS210.2.
Child restraint systems conforming to FMVSS213 or CMVSS213 specifica-
tions can be used.
This vehicle is designed to conform to the SAE J1819.
CAUTION
■
When installing a booster seat
Do not fully extend the shoulder belt to prevent the belt from going to ALR
lock mode. (→P. 60)
ALR mode causes the belt to tighten only which could cause injury or dis-
comfort to the child.
■
When installing a child restraint system
Follow the directions given in the child restraint system installation manual
and fix the child restraint system securely in place.
If the child restraint system is not correctly fixed in place, the child or other
passengers may be seriously injured or even killed in the event of sudden
braking, sudden swerving or an accident.
130
●
Access Cab and Double Cab models: If
the driver's seat interferes with the child
restraint system and prevents it from
being attached correctly, attach the
child restraint system to the right-hand
rear seat.
●
Access Cab and Double Cab models:
Adjust the front passenger seat so that
it does not interfere with the child
restraint system.
I n f o r ma t i o n P r o v i d e d b y :