Toyota TACOMA 2010 Quick Reference Manual page 466

Toyota tacoma 2010
Hide thumbs Also See for TACOMA 2010:
Table of Contents

Advertisement

4WD models and PreRunner
Stowing the flat tire, jack and all tools
Lay down the tire with the outer side facing up, and install the
holding bracket.
Then secure the tire, taking care that the tire goes straight up
without catching on any other part, to prevent it from flying for-
ward during a collision or sudden braking.
Keep winding until three clicks are heard.
Stow the tools and jack securely.
After completing the tire change
The tire pressure warning system must be reset. (→P. 379)
When using the temporary spare tire
As the temporary spare tire is not equipped with the tire pressure warn-
ing valve and transmitter, low inflation pressure of the spare tire will not
be warned. Also, if you replace the temporary spare tire after the tire
pressure warning light comes on, the light remains on.
5-2. Steps to take in an emergency
I n f o r ma t i o n P r o v i d e d b y :
5
451

Advertisement

Table of Contents
loading

Table of Contents