Subaru 2003 Legacy Service Manual page 8

HOW TO USE THIS MANUALS
4. SPECIFICATIONS
If necessary, specifications are also included.
5. INSPECTION
Inspections are included to be carried out before and after maintenance.
6. MAINTENANCE
• Maintenance instructions for serviceable parts describes work area and detailed steps with illustration. It
also describes the use of special tool, tightening torque, cautions for each procedure.
• If many serviceable parts are included in one service procedure, appropriate reference are provided for
each part.
Example:
15.Main Shaft Assembly for Sin-
gle-Range
A: REMOVAL
1) Remove the manual transmission assembly
from vehicie. <Ref. to MT-33, REMOVAL, Manual
Transmission Assembly.>
11) Tighten the lock nuts to the specified torque us-
ing ST1 and ST2.
NOTE:
Secure the lock nuts in two Places affer tightening.
ST2 499987003
ST1 498937000
Tightening torque:
118 N m (12.0 kgf-m, 86.8 ft-lb)
(A) Component
(B) Process
(C) Reference
HOW TO USE THIS MANUALS
SOCKET WRENCH
TRANSMISSION HOLDER
(E)
ST1
ST2
(D) Caution
(E) Tool number of special tool
(F) Name of special tool
(F)
HU-4
(A)
(B)
(C)
(D)
(G)
(H)
(G) Tightening torque
(H) Illustration
HU-00002