Subaru 2003 Legacy Service Manual page 73

7. Camshaft Drive Belt
A: REPLACEMENT
1. NON-TURBO MODEL
1) Remove radiator fan.
<Ref. to CO(H4SO)-28, Radiator Main Fan and
Fan Motor.> and <Ref. to CO(H4SO)-30, Radiator
Sub Fan and Fan Motor.>
2) Remove V-belt cover.
3) Remove V-belts.
<Ref. to ME(H4SO)-41, V-belt.>
4) Remove air conditioning compressor drive belt
tensioner.
5) Remove pulley bolt. To lock crankshaft use ST.
2.0 L model:
ST 499977400 CRANKSHAFT PULLEY
WRENCH
2.5 L model:
ST 499977100 CRANKSHAFT PULLEY
WRENCH
6) Remove crankshaft pulley.
7) Remove left side belt cover.
8) Remove front belt cover.
CAMSHAFT DRIVE BELT
PM-00115
ST
PM-00120
PM-15
PERIODIC MAINTENANCE SERVICES
9) Remove timing belt guide. (MT vehicle only)
10) Turn crankshaft and align alignment marks on
crankshaft, and left and right camshaft sprockets
with notches of belt cover and cylinder block:
ST 499987500 CRANKSHAFT SOCKET
( B )
(A) Notch
(B) Alignment mark
11) Remove belt idler.
12) Remove belt idler (No. 2).
PM-00008
( A )
( B )
( A )
( B )
PM-00121
PM-00122