Cleaning The Wheels, Tires And Track - M.T.H. Premier Genesis Diesel Locomotive Operator's Manual

5. After repeating the procedure for the other motor, reassemble the chassis and body,
being careful that the wire harnesses are not caught between the chassis and body and
reinstall the chassis screws.
Lubricate the outside truck block idler and drive gears with grease. Use the diagram
shown in Figure 6 below as a guide and add grease to the points marked with a "G."
Grease Idler Gears (G)
Grease Idler Gears (G)
Figure 6 : Greasing the gears

Cleaning The Wheels, Tires and Track

Periodically check the locomotive
wheels and pickups for dirt and
buildup, which can cause poor
electrical contact and traction as well
as prematurely wear out the neoprene
traction tires.
Periodically check the locomotive
wheels and pickups for dirt and
buildup, which can cause poor
electrical contact and traction and
prematurely wear out the neoprene
traction tires. Wheels and tires can be
cleaned using denatured (not rubbing)
alcohol applied with a cotton swab.
To clean the track, use RailKing Track
Cleaning Fluid and a clean rag or denatured (not rubbing) alcohol. Unplug the
transformer and wipe the rails of the track, turning the rag frequently to ensure that you
are using clean cloth on the rails. Thereafter, keep an eye on the track and clean it when
it gets dirty to ensure good electrical contact and to lengthen the life of the tires.
Premier Genesis Diesel Locomotive 13