JVC DLA-SH4KNL Instructions Manual page 35

Parameters used for the data format
The following 2 types of parameters are used for command and response data:
(1) ON/OFF (2) Special Parameter
Each parameter is as follows:
(1) ON/OFF
Shows the status (ON or OFF) of the unit, such as POWER and HIDE.
Character Hex
0 30
1 31
(2) Special parameters
Operation mode parameters
Character Hex
0000 30 30 30 30
0001 30 30 30 31
0002 30 30 30 32
0003 30 30 30 33
0004 30 30 30 34
DHCP client parameters
Character Hex
0 30
1 31
IP address parameters
Display the IP address using the dot ("." (2HE)) delimiter.
Example: "192.168.0.10"
External control command table
Function Command
Power U0F
Hide U00
Operation Mode UA0
DHCP Client UD2
IP Address UD3
Network Restart UDC
NOTE:
● After configuring the ADHCP ClientB and AIP AddressB, execute ANetwork RestartB.
Meaning
OFF
ON
Meaning
Standby state
Power ON state
Cooling state
Emergency cooling state
Emergency state
Meaning
DHCP
Static IP
Setting
Power On ELSE Power On
(OFF) (ON)
-
- -
Asking
ELSE ON/OFF
- -
-
-
-
-
-
Data Type
Special Parameter
-
-
Standby...
DHCP...
192.168. ...
[0] Fixed
35