Table of Contents
Advertisement
Connecting to Devices
Before connection, be sure to turn off both the projector and the device.
Connecting to Video Devices
• Thoroughly read the manual that comes with each video device.
• Use the supplied AV connection cable. S-video (Y/C) cable, BNC cable, DVI cable and PC Audio cables are not supplied.
Right side of projector
PC Audio cable
(sold separately)
Video Device 1
VCR (Video cassette recorder)
Image input
• Connect a composite image signal output
device or Y/C (S-video) image output device.
Sound input
• Connect to [AUDIO IN] terminal.
Connection
•
When connecting a video device, please use a TBC along with it, or use one with a built-in TBC.
•
Use of an extension cable to connect a video device and the projector could cause image deterioration or projection
failure.
•
When a signal with much jitter is reproduced on a VCR, or special-effect playbacks are performed, the upper part of the
image or the screen may be interrupted, erased or distorted.
R
P
/C
G
Y
B
P
/C
H/C
R
R
B
B
S
PC2
RS-232C OUT
REMOTE
SCREEN
TRIGGER
AUDIO IN
DVD player
Camcorder
Connecting to Various Devices
BNC Cable (sold separately)
V
DVI
PC3
PC1
RS-232C IN
Y/C
CONTROL
VIDEO IN
S-video cable
(sold separately)
Video Device 2
D-VHS or DVD player etc.
Image input
• Connect to component signal output
device, DTV format signal output device,
HDCP compatible video signal output de-
vice, etc.
• When the [PC2] input terminal is used,
the "PC2(BNC)" item in "Options" menu
must be correctly set. (☞ page 39)
• When the [PC3] input terminal is used,
the "PC3(HDCP)" item in "Options" menu
must be correctly set. (☞ page 39)
Sound input
• Connect to [AUDIO IN] terminal.
DVI Cable
(sold separately)
VIDEO
AV connection cable
(supplied)
21
Advertisement
Table of Contents
