Everlast EV500 User Instructions page 10

Assembly Instructions
Step 4
NOTE: Oil Bushing (small) (38)
have been Pre-assembled into
Upper Cross Bar (9).
a. Attach the Press Bar (10) to the
Upper Cross Beam (9)using one
Hex Bolt (54), two Washers (63)
and one Nylock Nut (66).
NOTE: Oil Bushing (big) (39) have
been Pre-assembled into the Press
Bar (10).
b. Remove two Nylock Nut (66)
and M12 Washer (63) from the Left
Butterfly Arm (11) and the Right
Butterfly Arm (12).
9
c. Attach the Right Butterfly Arm
(12) and Left Butterfly Arm (11)
to the Press Bar (10) using two
Washers (63) and two Nylock Nuts
(66).
d. Slide Arm Foam Roller (31) onto
Right Butterfly Arm (12) and Left
Butterfly Arm (11). (Note : A light
appication of washing up liqued will
assist.)
e. Remove two Hex Bolts (58) and
Washer (64) from the Handle Tube
(18).
f. Attach the Handle Tube (18) to
the Right Butterfly Arm (12) and
Left Butterfly Arm (11) using two
Hex Bolts (58) and two Washers
(64).
g. Slide the Middle-empty Cap (51)
and two Handle Grips (46) to the
Right Butterfly Arm (12) and Left
Butterfly Arm (11).
h. Attach the Tobacco-pipe (19) to
the Support Frame (8) using one
Hex Bolt (60), two Washers (65)
and one Nylock Nut (68).
i. Slide the Washer (70) and
Plum Blossom Nut (34) onto the
Tobacco-pipe (19).