Electrical Alignment; Preparation - Sony RM-B750 User Manual

Remote control unit rm-b750

Hide thumbs Also See for RM-B750:

Operation manual (26 pages)

Operation manual (64 pages)

Table Of Contents

Table of Contents

2-1. Preparation

Measuring Equipment

. Waveform monitor/Vectorscope Tektronix 1780R (for NTSC)/1781R (for PAL) or equivalent

. Color monitor

Peripheral Equipment

. BVP-E10 + CA-530/570/950, or

HDC-950/930

(The video output should be present at the remote connector.)

. AC adaptor AC-550/550CE, or DC variable power supply

Connection

COLOR VIDEO CAMERA

CAMERA ADAPTOR

REMOTE

DC IN

AC ADAPTOR

AC-550/550CE

or DC variable

power supply

If using a DC variable power supply to drive power, connect the positive (+) side of the power supply to

pin 4 of the DC IN connector on the camera adaptor, and negative (_) side to pin 1.

When the power is supplied via the DC IN connector, be sure to press the micro switch on the DC IN

connector, that turns on the power. It is recommended to use an XLR plug when driving power via the

DC IN connector.

Initial settings

. PANEL ACTIVE button/Operation panel : ON (lit)

. Test signal select button/Operation panel : BARS

. CABLE COMP SELECT

*1 : To select the cable length, use the menu of this unit. For details, refer to the operation manual supplied with the unit.

RM-B750

Section 2