Replacing The Lcd Unit - Sony RM-B750 User Manual

1-7. Replacing the LCD Unit

n
Life of flexible card wire will be significantly shortened if it
is folded. Be very careful not to fold the flexible card wire.
1. Remove the four RE knobs.
n
Poly-washer is installed under the RE knob. Be careful
not to lose the poly-washer.
2. Remove the IRIS knob assembly.
3. Remove the WHITE knob assembly.
IRIS control assembly
RE knob
Washer
4. Open the RM-B750. (Refer to Section 1-3.)
5. Remove the connectors (CN104, CN201) from the
MPU-124 board.
6. Remove the screws and the operation panel assembly
in the direction of the arrow.
MPU-124 board
Operation
(CN201)
panel assembly
MPU-124 board
(CN104)
RM-B750
WHITE knob assemblies
B3 x 5
Flexible card wires
7. Remove the three screws and the RM shield assembly.
8. Remove the two screws and the PWB (BKP) stopper.
RM shield assembly
B2.6 x 5
PWB
(BKP) stopper
1-7. Replacing the LCD Unit
B2.6 x 5
B2.6 x 5
B2.6 x 5
1-5 (E)