1-6. Flexible Card Wire
Disconnecting (Type E)
1. Turn off the power.
2. Open the portion A in the direction of the arrow and
pull out the flexible card wire.
Type E
Connector
Portion A
Flexible card wire
Connecting (Type E)
Insert the flexible card wire with the isolation surface
(blue) facing up and close the portion A.
Type E
Isolation surface
(blue)
1-4 (E)
Isolation surface
(blue)
Portion A
1-6-2. Shaping the Flexible Card Wire
When a new flexible card wire reaches as a service part,
carefully fold it referring to the illustration before installa-
tion into connector.
n
Never re-stretch the flexible card wire that has been folded
once, to the original shape.
Between CN-2278 board CN2 5 VR-277 board CN2
VR-277 board (CN2) side
Contacting
surface
About 28 mm
3 mm
Contacting
Insulated surface (blue)
surface
CN-2278 board (CN2) side
View from
the top
View from
the side
RM-B750