Playstation ® 2 Console; Startup With The Supplied Dvd Player Disc; Installing The Dvd Player On A Memory Card (8Mb) (For Playstation 2); Memory Card (8Mb For Playstation ® 2) - Sony SCPH-10171 Instruction Manual

Startup with the supplied DVD Player disc

To use all DVD remote control functions, you may need to install the DVD
Player (for PlayStation
(sold separately). For details, refer to the "Notes" section on page 15.
1
Press the MAIN POWER switch on the PlayStation
to turn the console on.
The 1 (standby) indicator turns red, and the console is in standby mode.
2
Press the 1/RESET button.
The 1 indicator turns green and the console startup screen is displayed.
3
Press the A (open) button.
The disc tray opens.
4
Place the disc into the disc tray with the label side facing up
(data side down).
5
Press the A button.
The disc tray closes. Once the disc has started, the disc startup screen is
displayed.
Note
The DVD Player (for PlayStation
videos on the PlayStation
z Installing the DVD Player on a memory
card (8MB) (for PlayStation
The DVD Player can be installed on a memory card (8MB) (for
PlayStation
®
install it from the supplied disc again at any time.
1
Insert the memory card (8MB) (for PlayStation
CARD slot 1 of the PlayStation
14
2) on a memory card (8MB) (for PlayStation
®
2 console.
®
2) (sold separately). If you delete the DVD Player, you can
2) is software that allows playback of DVD
®
2 console.
®
2)
®
2 console rear
®
2)
®
2) into MEMORY
®