Connection To The Power Grid - Devolo dLAN TV Sat PC User Manual

How to tell when you have done it correctly
b
b
3.4.3

Connection to the power grid

To connect the dLAN TV Sat PC to the power grid, plug the power supply into an
available power outlet and plug the DC connector into the DC IN 12V 1.5A
input on the tuner. Ensure that the power supply is fully inserted in the outlet.
How to tell when you have done it correctly
b
If the satellite antenna and LNB are installed correctly, you can receive TV
and radio stations using a conventional receiver and television.
If a functional network connection to the desired computer exists, the
devolo software has been installed and the corresponding TV and radio soft-
ware has been started, TV and radio stations are found during a channel
search.
When you connect the power supply to the power grid and the dLAN TV Sat
PC, the Power LED is illuminated on the power supply and the green ON LED
is illuminated on the back of the dLAN TV Sat Tuner.
|
19
Initial use
|
devolo dLAN TV Sat PC
|