Index; Freeze; Swap; Select - JVC I'Art 1003-TN-II-IM User Manual

Button Functions
Cable Box Note:
The Multi-Screen function may not operate when used with certain cable boxes. This is
because while some models of cable boxes may receive up to 181 channels, and may only
send the signal from one channel to your television. (Please refer to diagram on page 14). For
the Multi screen function to operate correctly, it must have access to all available channels.
Since the television is receiving the signal from only one channel from the cable box, it is
impossible for the Multi-screen function to display a second, different channel. Because there
are many different models of cable boxes in use today, if you are having problems operating
your Multi-screen function feature with your cable box, we recommend you contact your local
cable company for connection advice.

Index

This allows you to quickly look at up to 12 channels at a time so that you can decide which one
to watch.
Notes:
• Only RF (NTSC) input signal will be displayed.
• You can watch the channel added in channel summary. See page 33.

Freeze

Pressing the F
REEZE
picture displayed on the right. In order to return to the normal display, press the F
once again.
Note: When the screen is in freeze mode, if you do not operate it within 15 minutes, this
function will cancel out.

Swap

You can exchange the channel (or input) displayed in the split-screen window for the main
screen image by pressing the S
Note: This function will only work in SPLIT mode.

Select

With S , you can select the picture (channel) while viewing split-screen. When you press
ELECT
S button, the channel number on the top will be highlighted. Each press of S
ELECT
shift the channel.
60
button causes the screen to change to the split-screen display with the still
button.
WAP
button
REEZE
will
ELECT