Aspect Ratios; Ml/Mts - JVC I'Art 1003-TN-II-IM User Manual

Button Functions
Aspect Ratios (Continued)
Press the A
• By pressing the A
When you change the aspect ratios, it is different from their broadcast or recorded program.
NTSC, 480i, 480p,
HDCP 480p
Notes:
• You can also choose the size by pressing the π † buttons.
• When you change the aspect ratio or signal, reset the picture position to center.

ML/MTS

MTS technology allows several audio signals to be broadcast in analog at once, giving you a
choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an
MTS broadcast may also include a second audio program (SAP).
Press the M
By every press of the M
the mode
Notes:
• When you are receiving a digital broadcast, you can change the language by pressing the
M /M button.
L TS
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
• MTS unavailable if your television's Input source is in input 1, 2, 3 or 4 mode, as described
on page 61.
• ML/MTS will not work when you are using the Digital-In.
• You can also change the mode by pressing the π † buttons.
66
button
SPECT
button, you can change the size.
SPECT
HD, HDCP 1080i
/M button
L TS
/M button, you change
L TS
720P, HDCP 720p
STEREO
ON AIR
ON AIR
MONO
MTS
SAP