Connecting Your Devices - JVC I'Art 1003-TN-II-IM User Manual

Quick Setup
Basic Operation
Turn the television on and off by pressing the P
of the remote. If this is the first time you are turning on the TV, the interactive plug-
in menu appears.
• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if you
need to operate a cable box.
• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to
DVD to control a DVD player. Please see pages 26 to 29 for instructions on
programming your remote control to operate a cable box, VCR or DVD player.
Step 2 – Connecting Your Devices
Please follow the flow chart below to determine which connection setup is right for you. Then,
refer to the appropriate diagrams to connect your television to other devices that you may have.
After you are finished connecting your devices, plug the power cord into the nearest power
outlet and turn on the TV.
A VCR is not necessary for operation of the television. If you follow these diagrams and the
television does not work properly, contact your local cable operator.
• To connect a DVD player, see Diagram #3. A DVD player is optional.
• If you have a satellite television system, please refer to the satellite TV manual.
Yes
Do you have a VCR?
Yes
Diagram #2
Do you use a Cable TV Box?
No
Diagram #1
button at the top right corner
OWER
No
Do you have a VCR?
Yes
Diagram #3
Connections
POWER
T
TV CATV
VCR DVD
LTI SCREEN
No
Diagram #1
MUL
A
13